Humor
From my brother, Lloyd Williamson. Ya gotta luv 'em, they try so hard!
Qoutable quotes
Question: If you could live forever, would you and why?
Answer: "I would not live forever, because we should not live forever, because if we were supposed to live forever, then we would live forever, but we cannot live forever, which is why I would not live forever," --Miss Alabama in the 1994 Miss USA contest
."Whenever I watch TV and see those poor starving kids all over the world, I can't help but cry. I mean I'd love to be skinny like that, but not with all those flies and death and stuff." --Mariah Carey
"Smoking kills.
If you're killed, you've lost a very important part of your life," -- Brooke Shields, during an interview to become spokesperson for a federal anti-smoking campaign."I've never had major knee surgery on any other part of my body," --Winston Bennett, University of Kentucky basketball forward.
"Outside of the killings, Washington has one of the lowest crime rates in the country," --Mayor Marion Barry, Washington, DC.
"We're going to turn this team around 360 degrees," --Jason Kidd, upon his drafting to the Dallas Mavericks."I'm not going to have some reporters pawing through our papers. We are the president," --Hillary Clinton commenting on the release of subpoenaed documents."That lowdown scoundrel deserves to be kicked to death by a jackass, and I'm just the one to do it," --A congressional candidate in Texas."I don't feel we did wrong in taking this great country away from them. There were great numbers of people who needed new land, and the Indians were selfishly trying to keep it for themselves." --John Wayne"Half this game is ninety percent mental." --Philadelphia Phillies manager, Danny Ozark"It isn't pollution that's harming the environment. It's the impurities in our air and water that are doing it." --Al Gore, Vice President"If you let that sort of thing go on, your bread and butter will be cut right out from under your feet," --Former British foreign minister, Ernest Bevin"I love California. I practically grew up in Phoenix." --Dan Quayle"It's no exaggeration to say that the undecideds could go one way or another" --George Bush, US President"We've got to pause and ask ourselves: How much clean air do we need?" --Lee Iacocca"I was provided with additional input that was radically different from the truth. I assisted in furthering that version," --Colonel Oliver North, from his Iran-Contra testimony."The word "genius" isn't applicable in football. A genius is a guy like Norman Einstein," --Joe Theisman, NFL football quarterback &sports analyst."We don't necessarily discriminate. We simply exclude certain types of people. --Colonel Gerald Wellman, ROTC Instructor."If we don't succeed, we run the risk of failure." --Bill Clinton, President"We are ready for an unforeseen event that may or may not occur." --Al Gore, VP
"Traditionally, most of Australia's imports come from overseas." --Keppel Enderbery
"The loss of life will be irreplaceable." --Dan Quayle"I was recently on a tour of Latin America, and the only regret I have is that I didn't study my Latin harder in school so I could converse with those people." --Dan Quayle, VP
"It is wonderful to be here in the great state of Chicago!" --Dan Quayle, VP"Hawaii is a unique state. It is a small state. It is a state that is by itself. It is different from the other 49 states. Well, all states are different, but it's got a particularly unique situation." --Dan Quayle, VP"Your food stamps will be stopped effective March 1992 because we received notice that you passed away. May God bless you. You may reapply if there is a change in your circumstances." --Department of Social Services, Greenville, South Carolina"We apologize for the error in last week's paper in which we stated that Mr. Arnold Dogbody was a defective in the police force. We meant, of course, that Mr. Dogbody is a detective in the police farce." --Correction Notice in the Ely Standard, a British newspaper"If somebody has a bad heart, they can plug this jack in at night as they go to bed and it will monitor their heart throughout the night. And the next morning, when they wake up dead, there'll be a record." --Mark S. Fowler, FCC Chairman
Friday, October 27, 2006
INDUSTRIAL ROBOTICS
Industrial robot
From Wikipedia, the free encyclopedia
Jump to: navigation, search
An industrial robot is officially defined by ISO[1] as an automatically controlled, reprogrammable, multipurpose manipulator programmable in three or more axes. The field of industrial robotics may be more practically defined as the study, design and use of robot systems for manufacturing (a top-level definition relying on the prior definition of robot).
Industrial robots doing vehicle underbody assembly (KUKA).
Typical applications of industrial robots include welding, painting, ironing, assembly, pick and place, palletizing, product inspection, and testing, all accomplished with high endurance, speed, and precision.
Contents[hide]
1 Industrial robot types, features
2 History of industrial robotics
3 Technical description
3.1 Defining parameters
3.2 Robot programming
3.3 Movement and singularities
4 Recent and future developments
5 Industrial robot manufacturers
6 Notes
7 See also
8 References
9 External links to manufacturer of industrial robots
//
[edit]
Industrial robot types, features
The most commonly used robot configurations for industrial automation, include articulated robots (The first and most common) SCARA robots and gantry robots (aka Cartesian Coordinate robots, or x-y-z robots). In the context of general robotics, most types of industrial robots would fall into the category of robot arms (inherent in the use of the word manipulator in the above-mentioned ISO standard).
Industrial robots exhibit varying degrees of autonomy. Robots are programmed to faithfully carry out specific actions over and over again without variation and with a high degree of accuracy. These actions are determined by programmed routines that specify the direction, acceleration, velocity, deceleration, and distance of a series of coordinated motions. Other industrial robots are much more flexible as to the orientation of the object on which they are operating or even the task that has to be performed on the object itself, which the robot may even need to identify. For example, for more precise guidance, robots often contain machine vision sub-systems acting as their "eyes", linked to powerful computers or controllers. Artificial intelligence, or what passes for it, is becoming an increasingly important factor in the modern industrial robot.
[edit]
History of industrial robotics
George Devol received- the first patents for robotics in 1954. The first company to produce an industrial robot was Unimation, founded by George Devol and Joseph F. Engelberger in 1956, and was based on Devol's original patents. Unimation robots were also called programmable transfer machines since their main use at first was to transfer objects from one point to another, less than a dozen feet or so apart. They used hydraulic actuators and were programmed in joint coordinates, i.e. the angles of the various joints were stored during a teaching phase and replayed in operation. For some time Unimation's only competitor was Cincinnati Milacron Inc. of Ohio. This changed radically in the late 1970s when several big Japanese conglomerates began producing similar industrial robots. Unimation had obtained patents in the United States but not in Japan who refused to abide by international patent laws, so their designs were copied.
In 1969 Victor Scheinman at Stanford University invented the Stanford arm, an all-electric, 6-axis articulated robot designed to permit an arm solution. This allowed the robot to accurately follow arbitrary paths in space and widened the potential use of the robot to more sophisticated applications such as assembly and arc welding. Scheinman then designed a second arm for the MIT AI Lab, called the "MIT arm." Sheinman sold his designs to Unimation who further developed it with support from General Motors and later sold it as the Programmable Universal Machine for Assembly (PUMA). In 1973 KUKA Robotics built its first industrial robot, known as FAMULUS, this is the first articulated industrial robot to have six electromechanically driven axes.
Interest in industrial robotics swelled in the late 1970s and many companies entered the field, including large firms like General Electric, and General Motors (which formed joint venture FANUC Robotics with FANUC LTD of Japan). US start-ups included Automatix and Adept Technology, Inc. At the height of the robot boom in 1984, Unimation was acquired by Westinghouse Electric Corporation for 107 million US dollars. Westinghouse sold Unimation to Stäubli Faverges SCA of France in 1988. Stäubli was still making articulated robots for general industrial and clean room applications as of 2004 and even bought the robotic division of Bosch in late 2004.
Eventually the myopic vision of American industry was superseded by the financial resources and strong domestic market enjoyed by the Japanese manufacturers. Only a few non-Japanese companies managed to survive in this market, including Adept Technology, Stäubli-Unimation, the Swedish-Swiss company ABB (ASEA Brown-Boveri), the Austrian manufacturer igm Robotersysteme AG and the German company KUKA Robotics.
[edit]
Technical description
[edit]
Defining parameters
number of axes – two axes are required to reach any point in a plane; three axes are required to reach any point in space. To fully control the orientation of the end of the arm (i.e. the wrist) three more axes (roll, pitch and yaw) are required. Some designs (e.g. the SCARA robot) trade limitations in motion possibilities for cost, speed, and accuracy.
kinematics – the actual arrangement of rigid members and joints in the robot, which determines the robot's possible motions. Classes of robot kinematics include articulated, cartesian, parallel and SCARA.
working envelope – the region of space a robot can reach.
carrying capacity – how much weight a robot can lift.
speed – how fast the robot can position the end of its arm.
accuracy – how closely a robot can reach a commanded position. Accuracy can vary with speed and position within the working envelope. It can be improved by Robot calibration.
motion control – for some applications, such as simple pick-and-place assembly, the robot need merely return repeatably to a limited number of pre-taught positions. For more sophisticated applications, such as arc welding, motion must be continuously controlled to follow a path in space, with controlled orientation and velocity.
power source – some robots use electric motors, others use hydraulic actuators. The former are faster, the latter are stronger and advantageous in applications such as spray painting, where a spark could set off an explosion.
drive – some robots connect electric motors to the joints via gears; others connect the motor to the joint directly (direct drive).
[edit]
Robot programming
The setup or programming of motions and sequences for an industrial robot is typically taught by linking the robot controller via communication cable to the Ethernet, FireWire, USB or serial port of a laptop computer. The computer is installed with corresponding interface software. The use of a computer greatly simplifies the programming process. Robots can also be taught via teach pendant, a handheld control and programming unit. The teach pendant or PC is usually disconnected after programming and the robot then runs on the program that has been installed in its controller. In addition, machine operators often use human machine interface devices, typically touch screen units, which serve as the operator control panel. The operator can switch from program to program, make adjustments within a program and also operate a host of peripheral devices that may be integrated within the same robotic system. These peripheral devices include robot end effectors which are devices that can grasp an object, usually by vacuum, electromechanical or pneumatic devices. Also emergency stop controls, machine vision systems, safety interlock systems, bar code printers and an almost infinite array of other industrial devices are accessed and controlled via the operator control panel.
[edit]
Movement and singularities
Most articulated robots perform by storing a series of positions in memory, and moving to them at various times in their programming. For example, a robot which is moving items from one place to another might have a simple program like this:
Define points P1–P5:
Safely above workpiece
10 cm Above bin A
At position to take part from bin A.
10 cm Above bin B
At position to take part from bin B.
Define program:
Move to P1
Move to P2
Move to P3
Close gripper
Move to P4
Move to P5
Open gripper
Move to P1 and finish
For a given robot the only parameters necessary to locate the end effector (gripper, welding torch, etc.) of the robot completely are the angles of each of the joints. However there are many different ways to define the points for
[edit]
Recent and future developments
As of 2005, the robotic arm business is getting to a mature state, where they can provide enough speed, accuracy and ease of use for most of the applications. Vision guidance (aka machine vision) is bringing a lot of flexibility to robotic cells. So we have the arm and the eye, but the part that still has poor flexibility is the hand: the end effector attached to a robot is often a simple pneumatic, 2-position wrench. This doesn't allow the robotic cell to easily handle different parts, in different orientations.
Hand in hand with increasing off-line programmed applications, robot calibration is becoming more and more important in order to guarantee a good positioning accuracy.
Other developments include downsizing industrial arms for consumer applications and using industrial arms in combination with more intelligent automated guided vehicles (AGVs) to make the automation chain more flexible between pick-up and drop-off.
Prices of industrial robots will vary with the features, but are usually about 20,000 USD for an entry level model, and as much as 100,000 or more for a heavy-duty, long range robot.
[edit]
Industrial robot manufacturers
ABB
Adept
Janome
Cloos GmbH
Comau
DENSO Robotics
Epson Robots
FANUC Robotics
HYUNDAI Robotics
igm Robotersysteme
Intelligent Actuator
Kawasaki
KUKA Robotics
Nachi
Nidec Sankyo
OTC
Reis
Stäubli Robotics
Yaskawa-Motoman
[edit]
Notes
^ ISO Standard 8373:1994, Manipulating Industrial Robots – Vocabulary
[edit]
See also
List of production topics
Autonomous robot
[edit]
References
Nof, Shimon Y. (editor) (1999). Handbook of Industrial Robotics, 2nd ed. John Wiley & Sons. 1378 pp. ISBN 0471177830.A comprehensive reference on the categories and applications of industrial robotics.
[edit]
External links to manufacturer of industrial robots
ABB Robotics
Adept
Janome
C&D Robotics, Inc.
DENSO Robotics
EPSON Robots
FANUC Robotics America, Inc.
igm Robotersysteme
3D machine vision software for robotics with HALCON
Intelligent Actuator
Industrial Automation
Kawasaki Robotics
KUKA Robotics Corp.
Motoman Inc. (Yaskawa)
Nachi
Nidec Sankyo Corporation
Reis Robotics
RMT Robotics
Stäubli Robotics
ST Robotics
Transbotics
Neuronics Robotics
Guide To Industrial Robotics and Motion Control
Electronics Components Tutorials for Robotics
Retrieved from "http://en.wikipedia.org/wiki/Industrial_robot"
From Wikipedia, the free encyclopedia
Jump to: navigation, search
An industrial robot is officially defined by ISO[1] as an automatically controlled, reprogrammable, multipurpose manipulator programmable in three or more axes. The field of industrial robotics may be more practically defined as the study, design and use of robot systems for manufacturing (a top-level definition relying on the prior definition of robot).
Industrial robots doing vehicle underbody assembly (KUKA).
Typical applications of industrial robots include welding, painting, ironing, assembly, pick and place, palletizing, product inspection, and testing, all accomplished with high endurance, speed, and precision.
Contents[hide]
1 Industrial robot types, features
2 History of industrial robotics
3 Technical description
3.1 Defining parameters
3.2 Robot programming
3.3 Movement and singularities
4 Recent and future developments
5 Industrial robot manufacturers
6 Notes
7 See also
8 References
9 External links to manufacturer of industrial robots
//
[edit]
Industrial robot types, features
The most commonly used robot configurations for industrial automation, include articulated robots (The first and most common) SCARA robots and gantry robots (aka Cartesian Coordinate robots, or x-y-z robots). In the context of general robotics, most types of industrial robots would fall into the category of robot arms (inherent in the use of the word manipulator in the above-mentioned ISO standard).
Industrial robots exhibit varying degrees of autonomy. Robots are programmed to faithfully carry out specific actions over and over again without variation and with a high degree of accuracy. These actions are determined by programmed routines that specify the direction, acceleration, velocity, deceleration, and distance of a series of coordinated motions. Other industrial robots are much more flexible as to the orientation of the object on which they are operating or even the task that has to be performed on the object itself, which the robot may even need to identify. For example, for more precise guidance, robots often contain machine vision sub-systems acting as their "eyes", linked to powerful computers or controllers. Artificial intelligence, or what passes for it, is becoming an increasingly important factor in the modern industrial robot.
[edit]
History of industrial robotics
George Devol received- the first patents for robotics in 1954. The first company to produce an industrial robot was Unimation, founded by George Devol and Joseph F. Engelberger in 1956, and was based on Devol's original patents. Unimation robots were also called programmable transfer machines since their main use at first was to transfer objects from one point to another, less than a dozen feet or so apart. They used hydraulic actuators and were programmed in joint coordinates, i.e. the angles of the various joints were stored during a teaching phase and replayed in operation. For some time Unimation's only competitor was Cincinnati Milacron Inc. of Ohio. This changed radically in the late 1970s when several big Japanese conglomerates began producing similar industrial robots. Unimation had obtained patents in the United States but not in Japan who refused to abide by international patent laws, so their designs were copied.
In 1969 Victor Scheinman at Stanford University invented the Stanford arm, an all-electric, 6-axis articulated robot designed to permit an arm solution. This allowed the robot to accurately follow arbitrary paths in space and widened the potential use of the robot to more sophisticated applications such as assembly and arc welding. Scheinman then designed a second arm for the MIT AI Lab, called the "MIT arm." Sheinman sold his designs to Unimation who further developed it with support from General Motors and later sold it as the Programmable Universal Machine for Assembly (PUMA). In 1973 KUKA Robotics built its first industrial robot, known as FAMULUS, this is the first articulated industrial robot to have six electromechanically driven axes.
Interest in industrial robotics swelled in the late 1970s and many companies entered the field, including large firms like General Electric, and General Motors (which formed joint venture FANUC Robotics with FANUC LTD of Japan). US start-ups included Automatix and Adept Technology, Inc. At the height of the robot boom in 1984, Unimation was acquired by Westinghouse Electric Corporation for 107 million US dollars. Westinghouse sold Unimation to Stäubli Faverges SCA of France in 1988. Stäubli was still making articulated robots for general industrial and clean room applications as of 2004 and even bought the robotic division of Bosch in late 2004.
Eventually the myopic vision of American industry was superseded by the financial resources and strong domestic market enjoyed by the Japanese manufacturers. Only a few non-Japanese companies managed to survive in this market, including Adept Technology, Stäubli-Unimation, the Swedish-Swiss company ABB (ASEA Brown-Boveri), the Austrian manufacturer igm Robotersysteme AG and the German company KUKA Robotics.
[edit]
Technical description
[edit]
Defining parameters
number of axes – two axes are required to reach any point in a plane; three axes are required to reach any point in space. To fully control the orientation of the end of the arm (i.e. the wrist) three more axes (roll, pitch and yaw) are required. Some designs (e.g. the SCARA robot) trade limitations in motion possibilities for cost, speed, and accuracy.
kinematics – the actual arrangement of rigid members and joints in the robot, which determines the robot's possible motions. Classes of robot kinematics include articulated, cartesian, parallel and SCARA.
working envelope – the region of space a robot can reach.
carrying capacity – how much weight a robot can lift.
speed – how fast the robot can position the end of its arm.
accuracy – how closely a robot can reach a commanded position. Accuracy can vary with speed and position within the working envelope. It can be improved by Robot calibration.
motion control – for some applications, such as simple pick-and-place assembly, the robot need merely return repeatably to a limited number of pre-taught positions. For more sophisticated applications, such as arc welding, motion must be continuously controlled to follow a path in space, with controlled orientation and velocity.
power source – some robots use electric motors, others use hydraulic actuators. The former are faster, the latter are stronger and advantageous in applications such as spray painting, where a spark could set off an explosion.
drive – some robots connect electric motors to the joints via gears; others connect the motor to the joint directly (direct drive).
[edit]
Robot programming
The setup or programming of motions and sequences for an industrial robot is typically taught by linking the robot controller via communication cable to the Ethernet, FireWire, USB or serial port of a laptop computer. The computer is installed with corresponding interface software. The use of a computer greatly simplifies the programming process. Robots can also be taught via teach pendant, a handheld control and programming unit. The teach pendant or PC is usually disconnected after programming and the robot then runs on the program that has been installed in its controller. In addition, machine operators often use human machine interface devices, typically touch screen units, which serve as the operator control panel. The operator can switch from program to program, make adjustments within a program and also operate a host of peripheral devices that may be integrated within the same robotic system. These peripheral devices include robot end effectors which are devices that can grasp an object, usually by vacuum, electromechanical or pneumatic devices. Also emergency stop controls, machine vision systems, safety interlock systems, bar code printers and an almost infinite array of other industrial devices are accessed and controlled via the operator control panel.
[edit]
Movement and singularities
Most articulated robots perform by storing a series of positions in memory, and moving to them at various times in their programming. For example, a robot which is moving items from one place to another might have a simple program like this:
Define points P1–P5:
Safely above workpiece
10 cm Above bin A
At position to take part from bin A.
10 cm Above bin B
At position to take part from bin B.
Define program:
Move to P1
Move to P2
Move to P3
Close gripper
Move to P4
Move to P5
Open gripper
Move to P1 and finish
For a given robot the only parameters necessary to locate the end effector (gripper, welding torch, etc.) of the robot completely are the angles of each of the joints. However there are many different ways to define the points for
[edit]
Recent and future developments
As of 2005, the robotic arm business is getting to a mature state, where they can provide enough speed, accuracy and ease of use for most of the applications. Vision guidance (aka machine vision) is bringing a lot of flexibility to robotic cells. So we have the arm and the eye, but the part that still has poor flexibility is the hand: the end effector attached to a robot is often a simple pneumatic, 2-position wrench. This doesn't allow the robotic cell to easily handle different parts, in different orientations.
Hand in hand with increasing off-line programmed applications, robot calibration is becoming more and more important in order to guarantee a good positioning accuracy.
Other developments include downsizing industrial arms for consumer applications and using industrial arms in combination with more intelligent automated guided vehicles (AGVs) to make the automation chain more flexible between pick-up and drop-off.
Prices of industrial robots will vary with the features, but are usually about 20,000 USD for an entry level model, and as much as 100,000 or more for a heavy-duty, long range robot.
[edit]
Industrial robot manufacturers
ABB
Adept
Janome
Cloos GmbH
Comau
DENSO Robotics
Epson Robots
FANUC Robotics
HYUNDAI Robotics
igm Robotersysteme
Intelligent Actuator
Kawasaki
KUKA Robotics
Nachi
Nidec Sankyo
OTC
Reis
Stäubli Robotics
Yaskawa-Motoman
[edit]
Notes
^ ISO Standard 8373:1994, Manipulating Industrial Robots – Vocabulary
[edit]
See also
List of production topics
Autonomous robot
[edit]
References
Nof, Shimon Y. (editor) (1999). Handbook of Industrial Robotics, 2nd ed. John Wiley & Sons. 1378 pp. ISBN 0471177830.A comprehensive reference on the categories and applications of industrial robotics.
[edit]
External links to manufacturer of industrial robots
ABB Robotics
Adept
Janome
C&D Robotics, Inc.
DENSO Robotics
EPSON Robots
FANUC Robotics America, Inc.
igm Robotersysteme
3D machine vision software for robotics with HALCON
Intelligent Actuator
Industrial Automation
Kawasaki Robotics
KUKA Robotics Corp.
Motoman Inc. (Yaskawa)
Nachi
Nidec Sankyo Corporation
Reis Robotics
RMT Robotics
Stäubli Robotics
ST Robotics
Transbotics
Neuronics Robotics
Guide To Industrial Robotics and Motion Control
Electronics Components Tutorials for Robotics
Retrieved from "http://en.wikipedia.org/wiki/Industrial_robot"
Subscribe to:
Posts (Atom)
if you like it add to your book marks
